New Insulator Wire Securing Clip

Product Overview

It is used to fix the overhead insulated wires and bare wires of 10kV and below on the top of the porcelain insulator.

Cable range: 50-240mm²

Easy to install

Only need to screw two nuts,  1-2 minutes for installation .

good insulation; strong holding&break load

High-strength aluminum alloy body, and the wire

Insulating holding design for insulation and good wire grasp.

Eliminate installation dangers

Completely avoid the disadvantages of traditional manual lashing problem, greatly reduce man-made hazards.

Long work life

high-strength aluminum alloy body, M12 bolt.

Energy saving

Except for standard parts, it is non-guided

Magnetic material, no hysteresis loss.

Cost-effective

Simple structure, strong versatility, cost saving,

Beautiful price for mass promotion and use.

Design purpose

Current status of products in market

At present, there are 3 product types: manual tying, hoop type fixing and hook type fixing.

The new wire clip is a product that combines the advantages of the above three methods.

Manual tying

Problem: cable drop, short circuit, and disconnection accidents, and power loss.

--- Old hoop type

Troublesome installation, high cost.

There are 6 bolts need to be fastened in the device.

--- Hook-type

Simple installation.

High cost

Installation Instructions

Installation preparation: Put corresponding plastic piece into the groove to match different wire. loosen the two nuts,

Remove one of the bottom holders

Step 1: Put the wire into the groove of the porcelain insulator.

Install the disassembled clip on to the insulator.

Step 2: Put the other bottom holder into the clamp and fasten it.

The installation is finished.

Demand Customization

Goal of Design

1. Simple installation with less bolts and nuts.

2. Strong versatility, one product can be applied to a variety of insulators and wires.

3. Reliable performance, avoid relying on manual experience to ensure installation security.

4. Energy saving and environmental protection. The main body adopts non-magnetic material to solve the hysteresis loss.

5. Long service life, avoid electrochemical corrosion, and guarantee service life of more than 30 years.

6. Low cost, suitable for large-scale promotion and use in the market.

▲In response to the above requirements, we conducted multi-party field investigations, studied the feedback of electric power construction personnel from different utilities, and organized relevant experts to repeatedly discussion.

On the basis of the existing products of CONWELL, developed this new generation clip.